The Pro Traxion is a progress capture pulley which was designed to allow rope installation while the pulley is connected to the anchor to set up haul systems. It features a large diameter aluminum sheave mounted on sealed ball bearings and great efficiency, especially when hauling heavy loads on big walls. The swivel makes it easier to operate, allowing the pulley to be oriented under load and for direct connection of carabiners, ropes, etc. It features a toothed cam with self-cleaning slots to optimize performance under different conditions, and may be used as a simple pulley by locking the cam in the raised position. A red indicator provides a visual warning when the moving side plate is unlocked.

Specifications:

• Certification: CE EN 567, CE EN 12278, CE EN 12841 type B

• Material(s): aluminum, stainless steel, nylon

• Minimum rope diameter: 8mm

• Maximum rope diameter: 13mm

• Sheave diameter: 38mm

• Breaking strength - rope clamp: 4 kN

• Breaking strength - pulley: 11.5 kN x 2 = 23 kN

• Efficiency: 95%